HOW TO USE ORENZ

In the case of lead jam in the slider

In the case of lead jam in the clutch

0.2mm

How to clear a lead jam for 0.2mm diameter lead

1

Remove the nib from the barrel by turning it in the direction of the arrow.

2

Take the slider out of the nib.

3

The slider is very small. Please handle with special care to prevent losing it.

4

Use the cleaning pin attached to the eraser to clear the lead jam.

5

Carefully insert the cleaning pin into the top of the slider to clear the lead jam.

*Please make sure that the cleaning pin is not bent, then slowly insert it straight into the slider. Be sure the rubber retainer does not come off.

6

If you check the back of the slider and still see the lead jam, try to clear it from backside with the cleaning pin.

 

7

After the lead jam is completely cleared, set the slider back into the nib.

 

8

Turn the nib in the direction of the arrow to set it back to the barrel.

0.3mm or bigger diameter

How to clear a lead jam for 0.3mm or bigger diameter

1

Remove the nib from the barrel by turning it in the direction of the arrow.

2

Take the slider out of the nib.

3

The slider is very small. Please handle with special care to prevent losing it.

4

Use a refill lead to clear the lead jam.

5

Carefully insert the refill lead into the top of the slider to clear the lead jam.

6

If you check the back of the slider and still see the lead jam, try to clear it from backside with the refill lead.

7

After the lead jam is completely cleared, set the slider back into the nib.

8

Turn the nib in the direction of the arrow to set it back to the barrel.

0.2mm・0.3mm or bigger diameter

In the case of lead jam in the clutch

Precautions

PAGE TOP